If you have any questions feel free to drop me a line.

Originating New Master Keys

Adding Duplicate Keys (Requires two working keys)

1. Insert one valid programmed key into the ignition cylinder and turn to the "ON" position, then back to "OFF", remove key.

2.Within 5 seconds insert the second valid programmed key into the ignition cylinder and turn to the "ON" position, then back to "OFF".

3. Remove the key and insert the new key into the ignition cylinder and turn to the "ON" position within 10 seconds. Leave the key in the "ON" position for at least 1 second, then turn back to "OFF".

4. A security light should light for three seconds to indicate successful programming.

5.Once the key has been successfully programmed do not remove the key from the ignition. The key must stay in the ignition for 10 minutes. Do not attempt to start the car or remove the key. If removed too early the entire procedure will have to be repeated.

If you only have one key and want additional keys programmed see your Locksmith or schedule an appointment with us!

I only have 1 key, how do I program?

BACK HOME

Back to the key store.